1）Since the main part of a camera using the 120 camera CERTINA made from CERTO is not processed, it is easy to return this time.

2）It is easy to give the TLR to which no automatic volume stops with the unsuitable camera of the relation top bellows of a space are also attached by the reason for attaching a cutter in a lens room.

3）Square lumber is cut and inserted in a winding-up side. It inserts in so that it may cut slightly more greatly and may not adjust, attach and separate in Sand Paper.A bond is not used for exchange of a cutter.

4）Although the edge of a cutter is attached in the position cut to 46.7mm of film size of 127, it does not understand, unless it cuts, however it may measure carefully.

5）A break is put into the position of trial and error by the saw, it cuts with a quick-drying glue, and an edge is fixed.

6）let's boil and set an edge to a camera, in this time of being trial opening, assign 127 spools and carry out a size check again

7）It went out! It went out! Deep emotion! It is used state completion.

8）It rewinds to 127 spools in the dark back.The amount of films and cameras (baby Rollei etc.) with the necessity of cutting it since the length of back paper is also long have 120 from 127.

9）127 films were made now.The camera of a completeness automatic volume stop can be used satisfactory.In the case of the camera of the half-automatic volume stop which takes out 1 with a red window, if the mark is put by blue magic etc., it will be easy to use the beginning of a film.、Useless, if it writes in red! Since it is invisible. The cameras (YASHICA 44A, 3x4, 4x6.5, etc.) of red window use should study the number and dot of back paper.